Cleaning line for pork casings LF-IP

Design features

• production material: AISI 304 stainless steel
• adjustment of wheel speed
• the wheel is made of a polymeric material approved for contact with foodstuffs
• height-adjustable support allows you to expose the device to the required height for comfortable work 

Operation principle of the line

1. After separating the stomach from the intestinal set, the operator determines its approximate middle and throws it in a V-shaped form onto the receiving hook of the LF-B machine, where the intestine is captured by rollers.

2. Сasings is passed through rubber stretching and lower smooth rollers, during which the contents are separated.

3. Then casings passes through degreasing rollers, where the outer side is treated (degreasing-brushing).

4. To remove the contents of the stomach, it is necessary to install a side trough and a container for collecting the contents.

5. To prevent the product from getting on the floor, a container for collecting the stomach and used water should be provided.

6. The outer wall of the casings should be treated at least 2 times.

7. Then the intestine needs to be manually turned inside out. The turned casings is passed through the machine again for removing slime and degreasing.

8. After processing, casings should be placed in cold water for cooling.

Design features

• automatically maintains the temperature required by the technological process by supplying steam to the heating system
• automatic filling and water level control
• automatically maintains the set pressure
• carries out removal of the accumulating fat by special scrapers in combined capacity that prevents hit of fat in the sewerage and, accordingly, its clogging

Design features

• provides lubrication of rollers in automatic mode
• control of presence of food greasing in a tank
• the system of feeders provides metered supply of lubricant to each point on both sides of the drum

Design features

• production material: AISI 304 stainless steel
• automatic filling and water level control
• automatically maintains the set pressure

Specifications

• material: stainless steel AISI 304
• equipped with a water supply pedal
• water supply: G1/2
• outlet for sewerage: DN110

Specifications

• material: stainless steel AISI 304
• the tabletop is beaded on all sides
• equipped with a calibration valve and a calibration block
• height-adjustable supports
• air/water inlet: G 1/2
• overall dimensions: 2080x1100x900 mm. 

Design features

• the salting table has a special device for separating the casings, which prevents them from tangling during the salting process
• the retracting block captures the casing and stretches it over the table with salt
• control is made by the knee switch
• the machine has two tubes for nets, into which salted casings get

Specifications

• material: stainless steel AISI 316
• electrical connection: 400V/50Hz
• power: 0.75 kW
• overall dimensions: 2100x1000x1500 mm